search within



    Make an Offer

    Machine Title HERE

    *All fields are required.

    Use the form below to send us an offer - we will get back to you by phone or email as soon as possible. Thank you for your interest.

    Roll- Angle  -  Bender - Angle

    Machine Details:

    Model: R - 13S Angle Bending Roll
    Serial #: 96620

    Machine is equipped with the Shafts, Motors, and Drives that are normally found on the R-15S Model machine, but in the R-13S Frame
    Larger than Standard Diameter Shafts on RollS.

    Machine Weight is approximately 122,000 Lbs. versus 88,000 Lbs. Standard. The machine measures 16'- Wide x 19' - 6" Long x 11' - 6" Tall

    Travel Speed of Materials through Machine: Variable speed 0 to 23 Feet per Minute

    Digital Position Indicators for the (2) Rear Adjustable Rolls

    Shaft Bolt & Cap Assemblies are made of (3) Different Height Sections, which are Split Halves and can be removed easily for quick adjustment of the assembly.

    Beam-on-Edge Device (Hydraulically Powered), with (3) Sets of Pulling Rolls

    Hydraulic Pressure Gauge in clear view during operation of device

    Adjustable Guide Rolls that are Hydraulically Controlled in (6) Directions: Up / Down; In / Out (Front to Back); and Rotating (Left / Right)

    Various Dies and Spacers including the following:
    Standard Set of Angle / Bar Rolling Dies
    (Grooved for capture of Beam & Channel Flanges when rolling the Easy

    Set of Square / Rectangular Tubing Dies:
    Dies are Reversible, and made for both 3/8" and ½" Wall Tubing

    Numerous Spacer Sets used for the Rolling of Beams on Edge, Rolling Beamsand Channels the Easy Way, Spacing the Dies for Bars, Tubing, etc.

    Bolts and Fasteners for the attachment of Die and Spacer Sets

    3) Shop Fabricated In-Feed Roller Stands for easy conveying of material to the machine.

    The following sets of Pipe / Round Tubing Dies are also included:

    (1) Set of 8" Pipe Dies w/ Removable Spacer to convert to 8" OD Tubing

    (1) Set of 9" Pipe Dies w/ Removable Spacer to convert to 9" OD Tubing

    (1) Set of 10" Pipe Dies w/ Removable Spacer to convert to 10" OD Tubing

    (1) Set of 12" Pipe Dies w/ Removable Spacer to convert to 12" OD Tubing

    (1) Set of 20" Pipe / OD Tubing Dies
    This set has been chamfered on the outside for use in Straightening Split

    Die Sets are mounted on stands that are easily moved via forklift

    Each of the Pipe / Round Tube Dies are made in halves and bolted together for ease of installation and handling

    NOTE: Specifications, serial numbers, and prices are believed to be correct and should be used as a guide only. Quotes are typed when machine is purchased often from seller. Specs location, condition, price, accessories, and specs can change. Please check with us to verify any detail in question.

    financing options available here